Is bigger better? Should I stay stock or go with a bigger block?
5 posters
Page 1 of 1
Is bigger better? Should I stay stock or go with a bigger block?
Madami nag sasabi, mas matipid daw ang minamahal nating AMORE pag pinalakihan ang block.
Kung tingnan mo from the scientific side mali ung explanation dahil mas malaki ang block mas malaki ang gas consumption.
Pero ayon sa mga may experience with bigger blocks, mas matipid daw talaga or no difference sa gas consumption.
Sot eto ang tanong - Bigger block ba or stock na lang ako?
a: performance
b: gas consumption
c: mabuti ba siya in the long run
d: trip ko lang (bigger is badder-not for the green minded )
What would you say?
Kung tingnan mo from the scientific side mali ung explanation dahil mas malaki ang block mas malaki ang gas consumption.
Pero ayon sa mga may experience with bigger blocks, mas matipid daw talaga or no difference sa gas consumption.
Sot eto ang tanong - Bigger block ba or stock na lang ako?
a: performance
b: gas consumption
c: mabuti ba siya in the long run
d: trip ko lang (bigger is badder-not for the green minded )
What would you say?
moteGP- Posts : 428
Reputation : 5
Join date : 2009-10-22
Location : Las Piñas
Re: Is bigger better? Should I stay stock or go with a bigger block?
I would say GO FOR BIGGER BLOCK yun din ang mga positive feed backs na naririnig ko sa mga co-employer ko na naka MIO engine set-up, if time permits Im also planning to do that to my amore Im just waiting for the right budget (wag lang ipapa alam kay kumander) hehehehe...... sabi sa MCDO pag order mo... sir GO BIG TIME SIR? hhehehehe
BE SAFE ALWAYS
BE SAFE ALWAYS
Execom- Posts : 141
Reputation : 0
Join date : 2009-10-22
Age : 52
Location : Bacoor Cavite
Re: Is bigger better? Should I stay stock or go with a bigger block?
Sir newbie pa lang po ko dito MAO pero sa mga kasama ko po dito tagaytay naka-bore 59-61 ok lang in terms of usage bsta palitan mo lang un block at piston wag na galawin yun cams nya. at 3.7liter of gas at consume ng 35-40per liter expect na 25-30km per liter na lang yun mio mo at most important po yung MAGALING MEKANIKO gagawa nyan pra di po sayang un investment mo.
Sa akin po sir kahit meron na ko parts di ko pa install kasi wait ko pa 1yr warranty pa eto unit ko hehehe... sana makatulong po
Sa akin po sir kahit meron na ko parts di ko pa install kasi wait ko pa 1yr warranty pa eto unit ko hehehe... sana makatulong po
worm2007- Posts : 3
Reputation : 1
Join date : 2009-11-21
Age : 48
Location : Tagaytay / Angono, Rizal
Re: Is bigger better? Should I stay stock or go with a bigger block?
Meron nag aalok sa akin dito ng MTRT 58.5 steel bore with lightened valves, stage 1 namban cams, jettings - 6k lahat.
Iyong isang klase...
Marathon 58.5 steel bore with lightened valves, stage 1 namban cams, jettings - 5k lahat.
Ano ba ang magandang block?
Nag pa jettings na ako nung thursday pero di pa natapos ung pagtono.
Good AM MAO!
Iyong isang klase...
Marathon 58.5 steel bore with lightened valves, stage 1 namban cams, jettings - 5k lahat.
Ano ba ang magandang block?
Nag pa jettings na ako nung thursday pero di pa natapos ung pagtono.
Good AM MAO!
moteGP- Posts : 428
Reputation : 5
Join date : 2009-10-22
Location : Las Piñas
Re: Is bigger better? Should I stay stock or go with a bigger block?
moteGP wrote:Meron nag aalok sa akin dito ng MTRT 58.5 steel bore with lightened valves, stage 1 namban cams, jettings - 6k lahat.
Iyong isang klase...
Marathon 58.5 steel bore with lightened valves, stage 1 namban cams, jettings - 5k lahat.
Ano ba ang magandang block?
Nag pa jettings na ako nung thursday pero di pa natapos ung pagtono.
Good AM MAO!
MTRT maganda sir subok na po yan sa lahat ........
bandit250- Posts : 258
Reputation : 0
Join date : 2009-10-22
Location : sampaloc manila
Re: Is bigger better? Should I stay stock or go with a bigger block?
eto pinagpipilian ko sir ......
pero ang gusto ko dito no. 1.. puro MTRT po yun block nya
1.MTRT BLOCK CB 59MM W/ FORGED PISTON = 6800php
2.MTRT BLOCK CB 59MM W/ ORDINARY PISTON = 4900php
MIO CAMSHAFT ST2 V1 = 1850php
3.MTRT BLOCK CB 59MM W/ ORDINARY PISTON W/ CAMSHAFT ST2 V1 W/ STOCK LIGHTENED VALVES W/ INSTALLATION AND W/ 1 MONTH WARRANTY = 6800php
sir si joeyboymunti nagtext po sa akin nagtatanong kung kaylan daw tayo magpapabore up sabi nya .... tapos binigyan ko sya ng choice kung alin ang gusto nya sa tatlo .... sir MTRT po ang magkakabit sa atin ng block kung sakaling matuloy.
pero ang gusto ko dito no. 1.. puro MTRT po yun block nya
1.MTRT BLOCK CB 59MM W/ FORGED PISTON = 6800php
2.MTRT BLOCK CB 59MM W/ ORDINARY PISTON = 4900php
MIO CAMSHAFT ST2 V1 = 1850php
3.MTRT BLOCK CB 59MM W/ ORDINARY PISTON W/ CAMSHAFT ST2 V1 W/ STOCK LIGHTENED VALVES W/ INSTALLATION AND W/ 1 MONTH WARRANTY = 6800php
sir si joeyboymunti nagtext po sa akin nagtatanong kung kaylan daw tayo magpapabore up sabi nya .... tapos binigyan ko sya ng choice kung alin ang gusto nya sa tatlo .... sir MTRT po ang magkakabit sa atin ng block kung sakaling matuloy.
bandit250- Posts : 258
Reputation : 0
Join date : 2009-10-22
Location : sampaloc manila
Re: Is bigger better? Should I stay stock or go with a bigger block?
Sakit naman bandit ng mga price na yan, dun na lang ako sa...
TWH 58.5 steel bore. stage 1 cams, PnP, Jettings na Php4200.00
Sana magkaroon na ako ng pera....
TWH 58.5 steel bore. stage 1 cams, PnP, Jettings na Php4200.00
Sana magkaroon na ako ng pera....
moteGP- Posts : 428
Reputation : 5
Join date : 2009-10-22
Location : Las Piñas
Re: Is bigger better? Should I stay stock or go with a bigger block?
moteGP wrote:Sakit naman bandit ng mga price na yan, dun na lang ako sa...
TWH 58.5 steel bore. stage 1 cams, PnP, Jettings na Php4200.00
Sana magkaroon na ako ng pera....
uu nga eh ..... pero sulit naman yan kasi may mga warranty pa lahat .....
basta MTRT gayan talaga price.
meron akong alam na group mate ko sa kabila na may discount sya na 20% pero maghahanap ka nalang ng magkakabit.
bandit250- Posts : 258
Reputation : 0
Join date : 2009-10-22
Location : sampaloc manila
Re: Is bigger better? Should I stay stock or go with a bigger block?
@Bandit250
Tanong mo naman kung magkano ung ...
MTRT 58.5 Steel Bore
MTRT Stage 1 Cams
Tapos na kasi pa re-jet ung scoot, la na ako problems kumuha ng 80kph, problem is di mo pwede biglain ung 90-100kph, kailangan na talaga ups ung block.
Tanong mo naman kung magkano ung ...
MTRT 58.5 Steel Bore
MTRT Stage 1 Cams
Tapos na kasi pa re-jet ung scoot, la na ako problems kumuha ng 80kph, problem is di mo pwede biglain ung 90-100kph, kailangan na talaga ups ung block.
moteGP- Posts : 428
Reputation : 5
Join date : 2009-10-22
Location : Las Piñas
Re: Is bigger better? Should I stay stock or go with a bigger block?
ako project ko po sa january papa 125 ko ung mio kow..
ice_man035- Posts : 59
Reputation : 0
Join date : 2009-11-16
Re: Is bigger better? Should I stay stock or go with a bigger block?
@ice_man035
Pagtanong mo nga dyan sa inyo kung magkano ung
58.8 TWH na steel bore
Stage 1 Namban Racing Cams
Thanks!
Pagtanong mo nga dyan sa inyo kung magkano ung
58.8 TWH na steel bore
Stage 1 Namban Racing Cams
Thanks!
moteGP- Posts : 428
Reputation : 5
Join date : 2009-10-22
Location : Las Piñas
Re: Is bigger better? Should I stay stock or go with a bigger block?
moteGP wrote:@Bandit250
Tanong mo naman kung magkano ung ...
MTRT 58.5 Steel Bore
MTRT Stage 1 Cams
Tapos na kasi pa re-jet ung scoot, la na ako problems kumuha ng 80kph, problem is di mo pwede biglain ung 90-100kph, kailangan na talaga ups ung block.
pafs ito no. kila MTRT (sir henson)
3636084
3646284
bandit250- Posts : 258
Reputation : 0
Join date : 2009-10-22
Location : sampaloc manila
Re: Is bigger better? Should I stay stock or go with a bigger block?
ice_man035 wrote:ako project ko po sa january papa 125 ko ung mio kow..
pafs bakit naman bitin yan set up mo?
bandit250- Posts : 258
Reputation : 0
Join date : 2009-10-22
Location : sampaloc manila
Re: Is bigger better? Should I stay stock or go with a bigger block?
@bandit250
Tnx for the info bro
Tnx for the info bro
moteGP- Posts : 428
Reputation : 5
Join date : 2009-10-22
Location : Las Piñas
Re: Is bigger better? Should I stay stock or go with a bigger block?
moteGP wrote:@bandit250
Tnx for the info bro
your welcome po sir ....
mukhang mauunahan mo pa ako maging mamaw yun mio ko haaa....
bandit250- Posts : 258
Reputation : 0
Join date : 2009-10-22
Location : sampaloc manila
Re: Is bigger better? Should I stay stock or go with a bigger block?
bandit250 wrote:ice_man035 wrote:ako project ko po sa january papa 125 ko ung mio kow..
pafs bakit naman bitin yan set up mo?
sir may nakikipag palit nga sakin 135 na block sa stock ko kaso auko walwal na maxado makina gusto ko 125 lang para kunwari stock hehe..
ice_man035- Posts : 59
Reputation : 0
Join date : 2009-11-16
Similar topics
» advantage ng pipe pero nka stock block?
» LF: TWH 58.5 block - southside lang pik-up
» LF: SHAVED drive face (stock)...
» Stock pipe, kalkal pipe or aftermarket na pipe!?
» LF: TWH 58.5 block - southside lang pik-up
» LF: SHAVED drive face (stock)...
» Stock pipe, kalkal pipe or aftermarket na pipe!?
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|